MATERIALS INFO

COMPONENTMATERIALNORMATIVE REFERENCE
ImplantsTitanium gr. 4 ISO 5832-2, ASTM F67-06
Prosthetic componentsTitanium gr. 5 (Ti6Al4V ELI) ISO 5832-3, ASTM F136-11
Surgical instrumentsAISI 630 (EN 1.4542)
Titanium gr. 5 (Ti6Al4V ELI) only for taps
ASTM A564; ASTM F899
ISO 5832-3, ASTM F136-11
Castable componentsPlexiglass
Temporary components PEEK (Polietereterechetone)
Scan abutment Aluminum 11S

Titanium gr. 4 characteristics

CHEMICAL COMPOSITION

ONCFeTi
0,4 % max.0,06 % max. 0,10% max. 0,5 % max Remaining part

MECHANICAL CHARACTERISTICS

Mechanical characteristicsMin ValueMax Value
Resistance680 Mpa Max Value
Yield strenght (0.2%) 520 Mpa 560 Mpa
Elasticity 15% 35%
Area reduction25% 57%

Titanium gr. 5 (Ti6Al4V ELI) characteristics

CHEMICAL COMPOSITION

VAlCFeNOTi
3.5 – 4.5 %5.5 – 6.5 % 0,08% max.0,25 % max0,06 % max
0,13 % maxBalance

MECHANICAL CHARACTERISTICS

Mechanical characteristicsMin ValueMax Value
Resistance900 Mpa 1500 Mpa
Yield strenght (0.2%) 795 Mpa 920 Mpa
Elasticity15% 35%
Area reduction25% 51%

Aluminum characteristics

Mechanical characteristicsValue
Tensile strenght Rm300-340 N/mm2
Yield strenght Rp 0.2%200-220 N/mm2
Elongation A6-7%
Hardness HB100
Thermical treatmentT4-T6

Plexiglass characteristics

Mechanical characteristicsValueStandard
Tensile strenght69 MPaDIN EN ISO 527-2
Bending strenght97 MPaDIN EN ISO 527-2
Compression strenght
(deformation 1%/2% 5 mm/min, 10N)
16/29/64 MPaEN ISO 604
Thermical characteristicsValueStandard
Glass transition temperature149 °CDIN EN ISO 11357
Working temperature120 - 140 °C
Thermal expansion8 10-5 K-1DIN EN ISO 11359-1;2
Specific heat1.3 J/(g*K)ISO 22007-4:2008
Thermal conductivity0.25 W/(K*m)ISO 22007-4:2008

Peek characteristics

Mechanical characteristicsValueStandard
Tensile strenght116 MPaDIN EN ISO 527-2
Bending strenght175 MPaDIN EN ISO 527-2
Compression strenght
(deformation 1%/2% 5mm/min, 10N)
23/43/102MPaEN ISO 604
Thermical characteristicsValueStandard
Glass transition temperature150 °CDIN EN ISO 11357
Working temperature260-300 °C
Thermal expansion5 10-5 K -1DIN EN ISO 11359-1;2
Specific heat1.1 J (g*K)ISO 22007-4:2008
Thermal conductivity0.27 W/(K*m)ISO 22007-4:2008

HEADQUARTER

Via Lucania, 23
20090 Buccinasco (MI) - ITALY

Visit Us

EMAIL

info@overmed.eu
overmed@legalmail.it

Write Us

PHONE

+39 02 45712909
Fax: +39 02 45712909

Call Us

Follow Us

OVERMED Srl
P.IVA: 04159060963

Legal Office:
Via Parini, 9
20121 Milano (MI) – ITALY

HeadQuarter:
Via Lucania, 23
20090 Buccinasco (MI) – ITALY

Tel: +39 02 45712909
Fax: +39 02 45712909
Mail: info@overmed.eu
Pec: overmed@legalmail.it

Powered by [WebFrontier]

X

OVERMED Srl – MEDICAL DEVICES

  • In compliance with the provisions of current legislation, I declare under my responsibility to be a professional in the dental sector and therefore to be authorized to view the content of this website.